Avoiding Toughness Flat Faced Hydraulic Coupler Chrome Three LSQ-VEP Thread Locked Type

Applications

LSQ-VEP Series widely used in below public equipments:

Protable construction equipments

Hydraulic tools

Vehicles

Features:

Compatible with STCCHI VEP Series

HOW TO USE
• Before connecting clean the flat mating surface of coupling to avoid inclusion of contamination in the circuit.
• To couple pull forward the connection sleeve of the female coupling. Align the female and male coupling holding forward the connection sleeve and thread together turning the sleeve.

Keep couplers aligned during connection process. Do not push to connect couplings.
The screwing of the threads should be done by hand without the use of the tools for the first part of the connection.
The use of tools for the second part of connection can be necessary if there is high residual pressure in the circuit.
Screw the connecting sleeve of the female until metal surface contact with the male coupling is complete.
Tighten the sleeve to the base of the male using the tightening torque spec. as indicated in the table

below.
• To uncouple turn sleeve from contact position using a wrench, then unscrew making sure the couplings stay aligned through the entire process.